|
उत्पाद विवरण:
|
| OD: | 8-300mm | Surface: | Black and Bright |
|---|---|---|---|
| Length: | 1-12m | Standard: | AISI, ASTM |
| Technique: | Hot Rolled | ||
| हाई लाइट: | ss round bars,stainless steel round rod |
||
ASTM A182 XM-19 Hot Rolled Stainless Steel Bar 8-300mm UNS S20910 Solid Rod
Forging/hot rolled/ extrusion of steel: round bar/ square bar/ plate/ coil/ wire/ forging
Forging: Shafts with flanks/pipes/tubes/slugs/bar/donuts/ring/cubes/other shapes
pipe : OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forged/hot rolled + annealing/normalizing + tempering/quenching +tempering/any conditions based on the customer's requirement
XM-19/S20910 steel round bar
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on your requirement
XM-19/S20910 steel round bar
All grades steel bar, steel plate, steel sheet, steel tube, steel strip, steel wire ETC.
XM-19/S20910 steel round bar
XM-19 Stainless Steel, a highly fabricable, highly weldable, nitrogen strengthened, austenitic stainless steel, provides twice the yield strength of stainless steel type 316 and a resistance to corrosion equivalent to type 316. Even after extreme forming, XM-19 Stainless Steel stays non-magnetic. Due to all these advantages, it is often used in boat shafting, marine hardware, pumps, valves, and fasteners. The machinability of XM-19 Stainless Steel is comparable to that of alloy 316 or 317. It is formable, but there will be more springback with XM-19 than with other austenitic stainless steels. To achieve maximum hardness, use cold working. Because of XM-19's high tendency toward work hardening, process anneal the work piece after forming to relieve stress.
XM-19/S20910 Steel round bar
XM-19/S20910 steel flat bar
XM-19/S20910 steel sheet
XM-19/S20910 steel plate
XM-19/S20910 steel forging
XM-19/S20910 chemical composition
mechanical properties
| Carbon | 0.06 max | ||
| Chromium | 20.5 - 23.5 | ||
| Iron | Balance | ||
| Manganese | 4 - 6 | ||
| Molybdenum | 1.5 - 3 | ||
| Nickel | 11.5 - 13.5 | ||
| Niobium | 0.1 - 0.3 | ||
| Nitrogen | 0.2 - 0.4 | ||
| Phosphorus | 0.04 max | ||
| Silicon | 1 max | ||
| Sulphur | 0.03 max | ||
| Vanadium | 0.1 - 0.3 | ||
व्यक्ति से संपर्क करें: Mr. Gao Ben
दूरभाष: +86-18068357371
फैक्स: 86-0510-88680060
